RÖSLE gas grills models

Breakfast ideas on the gas grill G6-S
Icon gas grill

Small but mighty: The gas grill BBQ Portable VIDERO G2-P

Icon gas grill

Gas grill BBQ stations without prime zone

Gas Grill BBQ-Station Videro G2 black 50 mbar
Gas grill BBQ-Station Videro G3 black 50 mbar
Gas Grill BBQ-Station Videro G4 black50 mbar
Gas gill BBQ station Videro G3 stainless steel 50 mbar
Gas Grill BBQ-Station Videro G4 stainless steel 50 mbar
Dutch Oven lid with meat in Vario grill grate system

Vario+ Grill grate system

Even more possibilities with the VARIO grill grate system for all VIDERO grill stations.

As the Vario+ grill grate system will only be supplied as standard with the grills from 2021, you can easily retrofit your grill purchased before 2020 with the system and experience versatile grilling.

more

Icon gas grill

Gas grill BBQ stations with Primezone and Vario+ grill grate system

Breakfast ideas are prepared on the grill
Steaks are seared on the prime zone

The difference:

The S models have the following features, which are not present in the standard models:

  • Primezone with 3.5 kW power
  • Vario+ grill system included
  • Foldable side tables
  • max. size of gas bottles up to 11 kg

Gas grill BBQ-Station VIDERO G2-S Vario+ black 50 mbar
Gas grill BBQ Station VIDERO G3-S Vario+ black 50 mbar
Gas grill BBQ Station VIDERO G4-S Vario+ black 50 mbar
Gas Grill BBQ-Station VIDERO G6-S Vario+ black 50 mbar
%
Gas grill BBQ-Station VIDERO G4-S NERO Vario+ black
Icon gas grill

The complete ones: The RÖSLE Outdoor Kitchens

Gas grill BBQ Station Videro G4-SL

Gas grill BBQ-Island VIDERO G4-SL Vario+

  • Primezone in side table right (3,5 kW)
  • Side burner left (3,0 kW)
  • Vario+ grill grate system included
  • USB port for optional LED grill grate lighting
  • Storage space for gas bottles up to 11 kg and for grill accessories (right side container with insert shelf)

Gas grill BBQ Station Videro G4-SK

Gas grill BBQ-Kitchen VIDERO 4-SK Vario+

  • Primezone in side table right (3,5 kW)
  • Side burner left (3,0 kW)
  • Infrared back burner (3,2 kW)
  • Including Vario+ grill grate system
  • USB port for optional LED grill grate lighting
  • Stainless steel sink with faucet
  • Storage space for gas bottles up to 11 kg and grill accessories

Gas grill BBQ-Island VIDERO G4-SL Vario+ black 50 mbar
Gas grill BBQ-Kitchen VIDERO G4-SK Vario+ Stainless steel 50 mbar
Icon gas grill

MAGNUM - The best is just good enough!

Friends barbecue together on the terrace with Magnum Grill
Sparerips and potatoes are prepared on the gas grill

The Highlights 

  • FatDrip system technology 
  • Primezone in the right side table up to 800 °C
  • Side burner in the left side table 
  • Infrared back burner (4.7 kW)  
  • Illumination high power burner
  • Illuminated knobs
  • Jet flame ignition system

Natural gas is fundamentally a different type of gas than propane, and that's why the grills are built differently. For example, natural gas is lighter than air and propane gas is heavier. Propane-approved grills cannot be used with natural gas and vice versa. All the popular BBQ gas grills on the market are powered by propane gas, but there are few models that are also approved to run on natural gas. Information can be found in the instruction manual.

RÖSLE currently only carries grills that can be operated with propane gas.

If the grill is newly started and the gas cylinder has just been turned on, then you should leave each rotary valve on MAX for about 2 seconds to fill gas lines and the burner with gas. Now repeat the ignition process. If this does not work, then please check the steps in the following video:

The firebricks in the Vision gas grill ensure even heat distribution in the grill and must be cleaned when necessary. Carefully scrape off any loose debris on the firebricks and sweep it off with a broom. For hard encrustations, simply turn the bricks over and then run the grill on MAX for about 15 minutes. This will burn off the encrustations and the firebricks will be ready for use again.

Never clean the bricks with or in water. They soak up water and burst when heated up!

No! RÖSLE only uses enameled cast iron grates and there, baking is not necessary. Only raw steel or cast iron grates that do not have a coating are burned in. However, the grill should be operated at full power for approx. 30 minutes before first use in order to burn off any residues from the manufacturing process. Please also observe the instructions in the operating manual.

To clean the glass pane, the grill should be cold. It is a good idea to unscrew the thermometer to make cleaning easier. First remove coarse residues and grease splashes with a paper kitchen towel. Now use an oven cleaner or the RÖSLE Grill Cleaner and apply it to the glass pane. After a reaction time of approx. 10 minutes, you can clean the pane again with additional paper kitchen towels. Finally, wipe with a damp cloth and clear water.

In the case of hard encrustations, it is advisable to cover the cleaner with cling film after application. This keeps the cleaner moist and allows it to work longer and more intensively.
Do not use abrasive sponges or cleaners, this could scratch the pane!

To put the side burner into operation, the assembly must be carried out according to the assembly instructions of the grill. Pay special attention to the ignition cable, which must be plugged in during assembly. It is also important to assemble the hose and nozzle, please follow the instructions in the assembly manual carefully. The small hole of the brass colored nozzle must point into the opening of the burner, as this is where the gas enters the burner. There is a defined distance between the nozzle and the opening of the burner, which provides the oxygen supply to the burner. This must not be closed. Some models (Vision series) have a separate electronic ignition which must be equipped with a battery. Please make sure that the battery is charged and inserted with the correct polarity.

Please also note the instructions in the following video.

When the burner of the Prime Zone can be ignited, it takes approx. 5 min. until the ceramic of the burner turns orange (not so well visible in daylight). The grill should be operated protected from the wind. Please also check the filling level of the gas bottle, there should be at least 500g of gas left. You can reweigh this with the help of a bathroom scale or suitcase scale. The empty weight of the gas bottle / tare is printed on the neck of each bottle.

The ceramic must be completely white and there should be no large remnants of the last grilling process. If this is the case, then run the burner on full until the burner is completely white again. This is the only way to ensure that the burner's gas outlets are clear.
Never clean the burner with a cleaning brush, water or other sharp objects. Burning the burner free is completely sufficient.

1) Stainless steel grill grates can be cleaned in the dishwasher.

2) Chrome-plated grill grates and enameled cast iron grates are only burned off under high heat in the grill and then brushed off with a cleaning brush. Cleaning with mild rinse water is also possible but not necessary.
3) The charcoal grate of a charcoal grill does not need to be cleaned, as it is made of steel and will begin to rust and discolor in normal use as well. This is normal and represents normal wear and tear.

To burn out the grill grate, brush it with a cleaning brush while it is hot after grilling to remove the coarse remains of the grilling process. Now let the grill cool down completely and then cover it with a hood. The next time you grill, bring the coals to a glow again and put the grill grate back on immediately after adding the embers. After about 10 minutes, the residue on the grill grate will burn off and can then simply be brushed off with the grill cleaning brush. Finally, rub the hot grill grate with a paper kitchen towel soaked in some sunflower oil and with the help of the grill tongs to remove the burnt remains. Now the grill grate is lightly oiled and ready for the next grilled food.

In principle, grills must not be technically modified. The devices are tested in their original condition and may only be operated in this way. Any modification to the equipment voids the operating permit and the manufacturer's warranty.


This concerns for example:
1) The burner type must not be changed (stainless steel burner against Prime Zone).
2) No openings in the housing may be closed or changed.
3) No smoker rings may be used on kettle grills.
4) No additional burners may be added, removed, or installed
5) No changes may be made to the nozzle assembly.

To use the wok with the Vario griddle system, the heat distributors under the wok must be removed. The function of the heat distributor is now taken over by the wok itself. After using the wok, replace the heat distributors.

If the burner cannot be ignited, various causes may be responsible. First, the battery in the separate igniter must be checked and replaced if necessary (note polarity: positive pole to the outside). Then check the ignition cable on the back of the side table to see if it is plugged together. Finally, check whether a stapling noise can be heard? If so, the igniter is working and the spark should be arriving at the torch. To test the igniter, the gas supply of the gas cylinder should remain closed! For exact instructions, please refer to the following video.


RÖSLE offers various materials for grill grates:

Stainless steel grates > with steel as well as brass brushes
Chrome-plated grill grates > with brass brushes
Enameled cast iron grates > with brass brushes

If the grill is newly started and the gas cylinder has just been turned on, then you should leave each rotary valve on MAX for about 2 seconds to fill gas lines and the burner with gas. Now repeat the ignition process. If this does not work, then please check the steps in the following video:


On the inside of a door or on the side burner on the inside of the flap

If your gas grill does not come up to temperature, this can have very different reasons. Starting from the level of the gas bottle, gas bottle not fully turned up, leakage of the gas connection, very low outside temperature, thermometer too tight or defective to blockages on the burner or the nozzle by spider cocoons, etc..

To check these points once completely, we have created the following video, with which you can easily check your grill without tools.

The offset of the two doors can be adjusted. However, a level surface must be a prerequisite for this. Please follow the steps in the following video.


The removal of the gas burners is described in the operating instructions for your grill. For cleaning and complete inspection, the burner must be removed and checked at least once a year. This is included in the normal maintenance of the grill and can be done by the user.

For Videro gas grills, you can see the steps again in the video below:

No! The exhaust slot on the back of the lid must never be partially or completely closed. Clean combustion of the grill is then no longer ensured and a malfunction will occur. In addition, the internal cooking chamber temperature will increase considerably, resulting in serious damage to the gas valve unit.

The gas burners are tubular in shape and the incoming gas is forced through to the rear. This means that there is more gas in the rear part of the burners, which results in the rear area being hotter than the front. This physical property is exploited by starting to grill the raw food in the rear part of the grill grates. After both sides are grilled, the grilled pieces are moved to the front area for cooking.